I am back!!! February was a rough month. I had just finished the inside of my interactive card and was feeling the "happy dance".. Headed off to work, thinking the weekend would see me finishing it and publishing soon. Well life can change in a moment, while walking down the hall and thinking about life, I felt and "heard" a pop in my knee and I was down for the count. I understand pain, but to experience that white hot searing pain of acute injury and the awareness that walking was impossible was a new experience. Good thing I work in a medical facility, wheel chairs are easily acquired. I was whisked off to ED, MRI, Ortho, and medicated before the reality hit that it was going to be a long way to the top of those stairs and my craft room. Well, my saga continues but with help I can get upstairs and when finished, with help can get back down the stairs. So, on my return to the craft room, What did I make? A Windmill!!!
Cute isn't it? Wonder how that will fit into a card. I made a movie.
Ok, lets see how to make this: The principle is on a box idea. We are familiar with these, the exploding box, box card, and Karen Burniston's Flower Pot Pop Up. I just made a closed box and used a triangle as the element.
There is a Windmill Stamp in the Club Scrap March Kit Delft. I used this for inspiration. First started out by measuring the stamp. I determined that the base is slightly narrower than the height. I began here.
The windmill stamp is on the right
I drew out several different sizes of triangles to get the exact size, keeping in mind that I did not want a giant card, 5X7 was goal and I needed room for the blades. Then I made a model and adjusted the blades and figured out the construction.
Ended up with an equilateral triangle with base of 2" and height of 2.5". At this point it is important that the triangle be perfect. All the angles must be exact.
We could go into the geometry of this whole exercise, but in reality, just use a ruler and draw 2 lines. I used a t-square to keep everything straight. one line is 2" (the base) and crossed by line that is 2.5" (the height) and connect the lines. Then I drew tabs onto one side and the bottom.
Next I placed this on a folded piece of paper and created this:
Not the easiest to see, but the triangle pattern in first picture is represented on the left, creases are where the lines were drawn. The triangle to the left is another whole triangle, tabs are shown.
This is converted to the full pattern. Dotted lines are the fold lines. This was carefully cut and scored. The Inked embellishments were added, while flat and the windows cut out. The blades were added on before the closing up the "box". I used an xacto knife to cut out the "windows" and glued yellow paper behind the holes. Inked up the panes and added a white gel pen outline to indicate frames around the windows and door. A brad holds the blades.
Blades were also inked to add dimension.
I created the card base the same as in all my other cards. Cutting the base and adding the backing papers to the inside, leaving space along the gutter (the center fold). The Center fold on the front of the windmill must line up with the gutter. I added the glue to one tab and with the windmill open attached that side down. Then flattened everything, removed the strip from the second tab, folded the card, perfect.
Next I needed to adjust the blades.
I had made the blades too long and nothing seemed to keep them in my card, so I just trimmed them down until they stayed within the card.
Perfect!!
That is it, the inside of the card is nearly done. I just needed to add some additional focal points.
I always keep my failed backgrounds, you never know when you might need them!!!
Using a tulip die, I cut tulips from the backgrounds above, you wouldn't know, but the green is leaves and the yellow/pink are the flowers. Stamped a the shoe, colored with copics, added a sentiment. The other side was left blank for a message to be written .
The front is simple and complements the inside. I try to keep the front simple.
I I fussy cut one of the papers in the kit, added a ribbon , the embellishment and a sentiment.
Well this seems long and involved. But it isn't. Getting the pattern made was the hard part. Remember when making popups, the gutter or center is where "most of the action is" and both sides must be symmetrical. If all things are equal and it is foldable, it will work. Just experiment.
I will post February Interactive card soon. In retrospect, this mechanism needed to come first. The Succulent Card relies on Parallelogram and is more complicated. In the scheme of things, this is a very simple pop up. Let me know if you have any questions.
As I have said before, I love popup cards or interactive cards. I am fascinated by the movement. There are many cards and dies available for simple pop ups, but I want movement. I have been collecting books on Pop Ups for some time, but I am basically lazy and have always relied on others to do the hard work, figuring it out. Karen Burniston is a master at Pop up cards. Her last major die release for Elizabeth began that journey of moving mechanisms, and I used that die on several of my recent cards and posting. Twist-circle-pop-up.
I have followed Karen as she moved from Sizzix to Elizabeth Craft, and as I was anxiously awaiting her new product line, hoping to have more dies that incorporated movement at CHA, I learned that there will be no new releases beause she is no longer designing for EZ and has yet to find a home.
So, I decided to forge a path and start a posting about how to make these magical cards. So over the next few months, I am going to teach you about the basic mechanisms and how they are created to make your cards move. Hope you will enjoy this exploration. There is much experimentation with this process, but that in itself is magical. . . . . . . .
Are you ready.
Here is a video of the card I made for this posting.
This card is based on Parallelograms, What you say? Simple little boxes but provide a foundation of movement for many different mechanisms.
The parallelogram is a rectangle with 3 parallel folds.
The folds can be anywhere just parallel and when folded must be rectangular and not square.
The center of the card is the gutter and is where all movement comes from.
By not placing the backing cards up to the fold and leaving this area open allows for increased opening of the card. If you look at the video, the first demo shows the large dragonfly popping up. This is because the fold is allowed to open up flat.
In this card the Parallelogram will span the center fold. With glueing flaps folded (the end tabs) place the center line on the fold with the shortest tab to the left
Mark the end of the tab.
The next step is the most critical. Flip the rectangle over and place the long end on the mark and glue down.
When glued down this will be flat and span the fold.
That is all there is to a parallelogram. Each of those folds now become another fold to add more mechanisms to. Or can be used to create action, which is what I did.
Here is the parallelogram in place. In the small box I fold two triangles and the back folded to create "arm placements". This was done before glueing down. So the first step discussed was to just create a platform. This folding step is optional and is used to create movement.
With me so far? Just get out some scrap paper and make the model and play with the paper and folds. It truly is magical that a simple piece of paper can make other paper move.
Here I made a simple parallelogram with the fold and added arms to check movement.
I knew that I needed movement at the top and bottom which is why there are two folds in my parallelogram. On which part of the triangle the "arm" is place will determine the movement.
Ok that is all for the details of parallelograms. In the next installment we will explore another mechanism. Lets get onto the finishing of this card.
The Process of Creating:
Before I started the card I made a rough model of what I wanted.
I basically take paper and start adding. I began with a single parallelogram with fold, shown holding dragonfly (small) and arm for movement. Then I cut an opening in another piece of paper for the large dragonfly and attached a dragonfly. Open and closed a few times and decided this worked.
Onto a white paste up model
Here the measurements are being refined. Everything must fit into the card. How much movement I needed would determine the finished card. Those dimensions are marked not the backing.
Measurements are penciled in. Everything works. I need a minimum of a 5 X 6 card. So my finished card will be based on that measurement. To make it less square, I added 1/2 inch to height and so the finished card is 5 X 61/2 inches.
With all the measurements in hand I started construction. I ended up adjusting only slightly. One major adjustment was moving the folds on the parallelogram so they met at the center and eliminated the arm for the large dragonfly.
The card:
Stamped and heat embossed in black the 2 dragonflies, these were cut out with my Brother Scan n Cut. I also stamped and heat embosssed in Platinum and a sparkling powder on Vellum and fussy cut. These were glued together over the body.
The larger Dragonfly wings were colored with a coating of Wink of Stella for glimmer.
Assembly begins. Parallelogram is cut from 80# white cardstock, the rest from the designer paper.
I cut a triangle into a piece of paper and this will fold down and elevate the Large Dragonfly.
This is the back side of this mechanism with all the score tape to hod it down.
This is the mechanism. We will explore this in future blogs as it is the bases for another whole array of movement. I just created a triangle. Cut on the straight sides and folded it on the other set set of lines. This will fold flat and move the dragonfly out of the way when closed and pop up when opened..
Almost done. Both Dragonflies fly and move. Last step is the sun. I Stamped heat embossed and fussy cut it out, then colored with copics. It is attached to the upper part of the parallelogram.
This folds in towards the center and the small dragonfly moves away from the center.
Ok, lets take a few looks at all the parts finished. What you can't see in the video, but get a hint at, is the wings on both dragonflies are loose, they flutter when the card is opened. A product of thin vellum and heaving embossing.
The rest of the card!!
The front. I cut a backing sheet that would cover the card and leave enough to fold over to create a pocket for the magnets. First adhered the back part of the base card to this base.
The flap has been covered with Score tape, magnets are stuck into the score tape and then flap folded over. A ribbon place into the Channel before sealing. The other side of the magnets are attached with glue dots to the front, then the backing sheet is attached to the card base, sealing in all the magnets and finishing the front.
The sentiment was created by by stamping the work happy and then using another stamp, masked out all the words except Be, and stamped above the happy.
Don't forget to remove the masking before stamping!!
All that was left was to die cut, add a bow and some embellishments, Finished!!!
Hope you enjoyed this long post and that I have inspired you to look at making your own Interactive Cards,
See you Soon,
Happy Crafting
Josette.
Links:
Book Used: Pops Up by Duncan Birmingham. He has many videos on face book that shows the creation of these mechanisms. Just Google Duncan Birmingham. There are other great pop up engineers on You Tube as well and a quick walk through he pop up box section in your local bookstore is an immense source of inspiration. The Harry Potter Pop up is my Favorite and of course Starwars. But it is the simpler pop up books that lend themselves to us card makers.